2014 meets 2015

2014 за нас беше година исполнета со предизвици, пречки, соништа и креативни излези.

Би сакале да им се заблагодариме на СИТЕ уметници, модни дизајнери, дизајнери и архитекти кои го посветија сопственото време да соработуваат со нас и кои допринесоа многу за развиток на концепти, идеи и проекти. Го цениме искуството на малите тимови, идеите и контекстите што ги замислувавме за различни територии, споделувањето на дискусии и визии. Се надеваме дека во 2015 ќе имаме повеќе простор и можности за учење, развиток, искусување и експериментирање со концепти, контексти и идеи.

Ви посакуваме убав почеток во 2015.

Нека биде година исполнета со учење и прогрес.

2014 has been a year full of challenges and obstacles, dreams and creative projects.

We would like to thank ALL the artists, fashion designers, designers and architects who devoted their time to collaborating with us and contributed greatly to developing concepts, ideas and projects.  We appreciate the small teams we experienced, the ideas and contexts we developed for various territories and the discussions and visions we were part of. We hope that in 2015 we will have much more space and opportunity to learn, develop, experience and experiment concepts, contexts and ideas.

We wish you a great start into 2015.

Let it be a year full of learning and progress. 

Hello Sweetheart necklace

Hellow Sweetheart- Le Petite necklace

something special to mark the beginning of the new year 

Christmas Hello Sweetheart giveaway ( valid only for Macedonia )

Follow our facebook page to enter a chance to get your own Hello Sweetheart brooch . 

https://www.facebook.com/lasercutdesignlab

Follow instructions on our facebook page : 

https://www.facebook.com/lasercutdesignlab/photos/a.170641004934.147074.167557814934/10152919040169935/?type=1&theater

Winner will be chosen by a random number generator. 

The brooch will need to be picked up during next week from our studio. 

Good luck ~ !

Laser Cut a paper Christmas card Trotec lasers

Laser Cut a Paper Christmas Card

Surprise your family and friends with your personal Christmas card cut with the laser. All you need for this is paper in two colors.

Required material:

§  Paper approx. 200 g fir-tree green

§  Paper approx. 200 g white

§  Paper glue

Suitable machines: Speedy 100, Speedy 300, Speedy 500

Trotec laser used: Speedy 300, 60 watt, 1.5 inch lens

Step 1

This sample is made from two materials. We start by engraving and cutting the green paper, and then the white paper. If you like, you can add your personal inscription. We have used the following laser parameters:

§  Grid engraving: power: 15 %, speed: 70 %, resolution: 500 dpi/500 ppi

§  Vector marking – scoring: power:10 %, speed: 8 %, resolution: 500 dpi/10000 Hz

§  Vector cut – cutting through: power: 15 %, speed: 2 %, resolution: 500 dpi/8000 Hz

Step 2  

Once you have cut both paper sorts to size, first fold the green paper along its center folding line so that the engraving is on the inside. After that, open it again and fold it along the other folding lines (marked red in the file). You will thus obtain a three-dimensional object.  

Step 3 

Next, apply glue thinly to the back side of the green paper and glue it to the white paper. Leave the card folded open until the glue has dried completely.

You can find the template and the parameters for JobControl here: http://www.troteclaser.com/nl-NL/Laser-Voorbeelden/Papier/Pages/Kerstkaart.aspx

The mini sketchbook cycles of inspiration

The sketchbook cover represents cycles of inspiration, from the time when we search for an idea in the sea of poetic pictures, memories and inspirations, to the time that it finally evolves into an whole. 

Different kind of paper is available according to preferences, for more information you can contact us via mail. 

available to order at asekutkovska(@)gmail.com