Tuesday, November 15, 2016

Trotec Lasers DIY projects: Perpetual calendar of wood and engraving plastic

Offer individual perpetual calendars of wood and engraving plastic.


Required material:
Veneer Bamboo 3 mm (119799) - 1 sheet for the back
TroLase 0,8 mm (L204-203) - 4 quarter sheets for the calendar sheets
Screws (diam. 5 mm, 20 mm long) with butterfly nut - 2 pieces

Machine used:
Trotec Speedy 360
80 Watt with 2" lens

Use a honeycomb cutting table

Step by Step

Step 1: Import /create design template

Import our designs into your graphic program and adapt it according to your requirements.

Step 2: Laser process
Position the material into the laser engraver and cover the rest of the engraving area for optimum exhaust performance. Send the wood laser job  and then the four TroLase jobs to the machine.

500 dpi resolution
Cutting: 100 % power, 0,7 % speed, 1000 ppi, air assist on

500 dpi resolution
Engraving (black): 35 % power, 30 % speed, 600 ppi, air assist on, z-offset +1mm, HQ mode (advanced material settings)
Cutting (red): 2,5 % power, 0,5 % speed, 1000 Hz, air assist on, z-offset +2mm
Cutting (blue): 25 % power, 2 % speed, 1000 ppi, air assist on, z-offset  +2mm
Cutting (cyan): 50 % power, 2 % speed, 1000 ppi, air assist on

Select the following options in JobControl® to get perfect cutting results.
Optimized geometries
Inner geometries first
Engraving from bottom to top reduces the cleaning of the engraved and cut materials

Step 3: Post-processing
Once you have finished the laser process, clean TroLase material with water. Then use two binding screws to fix the calendar sheets and mount the calendar to a wall.

Follow this link for more information on downloading .pdf files and job control instructions

On more information on Best Christmas Lights for 2017 check the following link :

No comments:

Post a Comment

A dash of Minimal chic: On outfits, exhibitions & invitations - Featuring The Paperless Post

featuring Oscar de la Renta cards design for Paperless post  https://www.paperlesspost.com/cards/group/oscar_de_la_renta Oh, the sme...